You currently have no products in your basket.
Payment methods


SISS Print Solutions
Fujifilm MagnaColours

WPS Safewash NE Gel

Product Ref: QR2826
WPS Safewash NE Gel
£10.00 ex VAT
In Stock
Manufacturer: Wicked Printing Stuff


Safewash NE Gel is an essential aid for any busy waterbased or solvent ink based screen printer.  It is  also ideal for schools, colleges, print clubs as it extends the time taken for the ink on a used screen to dry following  printing.  

Helps reduce improve ink staining, reduces the cleaning effort and gives you up to an hour before reclaiming (see Application below).  In busy print shops, studios and classrooms often more used screens are produced than can be cleaned at that time. Safewash NE Gel begins to dissolve the printed ink whilst slowing down the drying of the screen.



After printing is complete, remove the excess ink using a pallet or push knife. Apply the Safewash NE Gel generously to both sides of the screen with a brush ensuring that all the ink has been covered. The screen can now stand at room temperature for up to an hour (depending on the temperature of the room and the curing speed of the ink) before the screen will require reclaiming.



When reclaiming, first rinse down the screen on both sides using mains pressure water. Ensure that all of the ink and the Safewash NE gel has been removed before adding stencil remover to the screen. We would recommend High Strength Stencil Stripper or Stencil Stripper GEL. Brush the stencil strip into the stencil until it has completely softened and then remove with main pressure water followed by high pressure water spray. If any stains from the ink or stencil material are remaining, remove with KC or WM Haze remover.

Avaiable in 1 litre (price shown) or 5 litre packs



Select the attributes for this product
 Required Minimum Selection Not Met. Maximum Selections Exceeded.
5 Litres
1 Litre

Price with Attributes:

? x WPS Safewash NE Gel:
£10.00 ex VAT
Select Quantity and choose Add To Basket