Description
MagnaPrint® Emboss is a ready to use water-based print paste for achieving an embossed surface to polyester fabrics. The ink is designed to be washed off following use, leaving a raised effect
to desired areas of the fabric.
Link to in depth article published in images magazine.
- MagnaPrint® Emboss can be printed directly on fabric. Stronger effects can be achieved by using several printing strokes.
- Printing is best undertaken using 32 – 43T (80 – 110) mesh screens with rectangular squeegees.
- After printing, the fabric should be cured for a minimum of 2 ½ minutes at 165 – 170°C (330 – 340°F).
- Ideally thoroughly wash the material as soon as possible following curing to remove the ink for the strongest effects.
How to Use
- Fabric Type: Polyester
- Mesh: 32-43T
- Squeegee: Recommend 65 Red
- Stencil: Use Water Resistant Emulsion e.g. MagnaPrint Emulsion, Autosol 6000, Dirasol 25.
- Curing: 150 seconds at 170 Degrees C
- Clean Up: Use Water
Download MagnaPrint Emboss Ink TDS
If you require pricing, samples, or further information please email sales@inkandsolvents.co.uk or call us on 01614426555 or complete Enquiry Form
