MagnaPrint Crosslinker 100

POA

MagnaPrint® Crosslinker 100 can be used to considerably reduce the time of curing pigment prints. Ideal if you have a dryer which cannot cure the print in a single pass.

Not sure which Crosslinker is best for you?

SKU: QR-MagnaPrint-Crosslinker-100 Category: MagnaPrint Additives

Description

MagnaPrint® Crosslinker 100 can be used to considerably reduce the time of curing pigment prints.

It is compatible with most MagnaPrint® printing systems. MagnaPrint® Crosslinker 100 is particularly useful where dryers have insufficient dwell time.

MagnaPrint® Crosslinker 100 can be used at varying concentrations, depending on the product into which it is to be added, but as a general rule do not exceed 20g/kg.
Trials should be carried under specific printing conditions to arrive at the correct addition level.
Once added to a print paste, MagnaPrint® Crosslinker 100 will remain active for a maximum of 8 hours. The print paste stability is not adversely affected and the system can be reactivated by a further addition of MagnaPrint® Crosslinker 100.
Minimum curing recommendation – 1 minute at 165°C (330°F