WPS Premium Aluminium Squeegee

£4.80£50.40 inc VAT
£4.00 - £42.00 (ex. VAT)

Aluminium Squeegee Handle

Premium professional Squeegee blades with the triple numbers represent the hardness of each section of the triple blade. i.e. 85/90/85 blades have a 90 shore inner blade, and an 85 shore outer blades.

Available in Set Widths or you can use Width per inch. (select quantity in basket e.g. 22″ required then add a quantity of 22 to the basket.

Clear

Description

Blades Available:-

  • 65 Red– Soft Blade. Suggested Mesh count is 15T-55T. Ideal for – Textile Printing and high opaque designs especially light onto dark printing. Suitable for Plastisol Inks.  Ideal for smoother surface.

 

  • 65/90/65 Red – Softer General Blade. Suggested Mesh count is 15T- 77T. Ideal for – Textile Printing and high opaque designs and some General / fine lines and detail.  Suitable for Plastisol Inks and for WPS Water Based inks.  Ideal for rough / absorbent surfaces.

 

  • 75 Green– Medium Blade. Suggested Mesh count is up to 43T-77T.  Ideal for – Textile and other substrate Printing, finer detailed artwork. Suitable for Plastisol and WPS Water Based inks.  Ideal for smoother surfaces.

 

  • 75/90/75 Green–Medium/ Hard Blade. Suggested Mesh count is 77T plus. Ideal for – Textile and other substrate printing, finer detailed artwork , and harsh solvent based inks. Suitable for Plastisol, Water Based, Paper & Board / Vinyl’s / Solvent Inks. Ideal for smoother surfaces.

 

  • 80/90/80 Purple-Hard Blade. Suggested Mesh count is 90T-160T. Ideal for Textile and other substrate printing including Paper, Board, Metal and ceramics printing. This blade will allow a good amount of pressure to increase definition to your artwork and harsh solvent based inks. Ideal for photographic work and fine lines. Suitable for Plastisol, Water Based, Paper & Board / Vinyl’s / Solvent Inks. Suitable for non absorbent surfaces.

 

  • 85 Blue-X Hard Blade. Suggested Mesh count is 120T-200T. Ideal for Textile and other substrate printing including Paper, Board, Metal, ceramics and glass printing. This blade will allow a good amount of pressure to increase definition to your artwork, It will also limit the deposit of ink which is great for non absorbent surfaces and extreme solvent based inks. Ideal for photographic work and fine lines. Suitable for Plastisol, Water Based, Paper & Board / Vinyl’s / Solvent Inks. Suitable for non absorbent surfaces.

 

  • 85/90/85 Blue-XX Hard Blade. Suggested Mesh count is 120T-200T. Ideal for Textile and other substrate printing including Paper, Board, Metal, ceramics and glass printing. This blade will allow a good amount of pressure to increase definition to your artwork, It will also limit the deposit of ink which is great for non absorbent surfaces and extreme solvent based inks. Ideal for photographic work and fine lines. Suitable for Plastisol, Water Based, Paper & Board / Vinyl’s / Solvent Inks. Suitable for non absorbent surfaces.

 

  • Red D Cut (sometimes also known as V Cut) Blade.  Ideal for Textile Printing.  Plastisol Ink. Suitable for absorbant materials. D cut blades lay down a heavier deposit of ink. Great when printing light coloured inks onto dark garments.

Additional information

Width

Premium Squeegee 12", Premium Squeegee 15", Premium Squeegee 18", Premium Squeegee per Inch

Blade

65 Red Square – Soft Blade, 65/90/65 Red Square – Softer General Blade, 75 Green Square – Medium Blade, 75/90/75 Green Square –Medium/ Hard Blade, 80/90/80 Square Purple-Hard Blade, 85 Blue-X Square Hard Blade, 85/90/85 Blue-XX Square Hard Blade, 65 Red D Cut Blade