Description
WPS Premium Aluminium Squeegee blades with the triple numbers represent the hardness of each section of the triple blade. i.e. 85/90/85 blades have a 90 shore inner blade, and an 85 shore outer blades.
Available in Set Widths or you can use Width per inch. (select quantity in basket e.g. 22″ required then add a quantity of 22 to the basket.
WPS Premium Aluminium Squeegee – Square Cut Blades Available:-
- 65 Red Soft Blade. Suggested Mesh count is 15T-55T. Ideal for – Textile Printing and high opaque designs especially light onto dark printing. Suitable for Plastisol Inks (especially printing heavy white plastisol onto dark garments). Ideal for smoother surface.
- 65/90/65 Red Softer General Blade. Suggested Mesh count is 15T- 77T. Ideal for – Textile Printing and high opaque designs and some General / fine lines and detail. Suitable for Plastisol Inks and for WPS Water Based inks. Ideal for rough / absorbent surfaces.
- 75 Green Medium Blade. Suggested Mesh count is up to 43T-77T. Ideal for Textile and other substrate Printing, finer detailed artwork. Suitable for Plastisol and WPS Water Based inks. Ideal for smoother surfaces.
- 75/90/75 Green Medium/ Hard Blade. Suggested Mesh count is 77T plus. Ideal for Textile and other substrate printing, finer detailed artwork, and harsh solvent-based inks. Suitable for Plastisol, Water Based, Paper & Board / Vinyl’s / Solvent Inks. Ideal for smoother surfaces.
- 80/90/80 Purple-Hard Blade. Suggested Mesh count is 90T-160T. Ideal for Textile and other substrate printing including Paper, Board, Metal and ceramics printing. This blade will allow a good amount of pressure to increase definition to your artwork and harsh solvent-based inks. Ideal for photographic work and fine lines. Suitable for Plastisol, Water Based, Paper & Board / Vinyl’s / Solvent Inks. Suitable for non-absorbent surfaces.
- 85 Blue-X Hard Blade. Suggested Mesh count is 120T-200T. Ideal for Textile and other substrate printing including Paper, Board, Metal, ceramics and glass printing. This blade will allow a good amount of pressure to increase definition to your artwork, it will also limit the deposit of ink which is great for non-absorbent surfaces and extreme solvent-based inks. Ideal for photographic work and fine lines. Suitable for Plastisol, Water Based, Paper & Board / Vinyl’s / Solvent Inks. Suitable for non-absorbent surfaces.
- 85/90/85 Blue-XX Hard Blade. Suggested Mesh count is 120T-200T. Ideal for Textile and other substrate printing including Paper, Board, Metal, ceramics and glass printing. This blade will allow a good amount of pressure to increase definition to your artwork, it will also limit the deposit of ink which is great for non-absorbent surfaces and extreme solvent-based inks. Ideal for photographic work and fine lines. Suitable for Plastisol, Water Based, Paper & Board / Vinyl’s / Solvent Inks. Suitable for non-absorbent surfaces.
WPS Premium Aluminium Squeegee – D Cut Blades Available:-
- Red D Cut (sometimes also known as V Cut) Blade. Ideal for Textile Printing especially when using heavy Plastisol Ink. Suitable for absorbent materials. D cut blades lay down a heavier deposit of ink. Great when printing light-coloured inks onto dark garments.
If you are not sure which blade to choose for your WPS Premium Aluminium Squeegee, please feel free to contact us +44 161 442 6555 sales@inkandsolvents.co.uk and we can advise you further.