Sericol Dirasol 25 – 0.9 Litre

Description

Dirasol 25 is now discontinued. Please contact us for advice on alternative emulsions.

Sericol Dirasol 25 is a diazo photostencil emulsion that is compatible with water-based or plastisol inks.

It is specially formulated for printers of T-shirts, sports and fashion wear, using water-based or plastisol inks. The emulsion is suitable for all Sericol and WPS Water Based inks.

A perfect all round photosensitive emulsion.

•  Light violet colour, 2 pack diazo direct emulsion
•  Excellent mesh bridging
•  Good see-through for easy registration/setting up
• Resistant to plastisol and water-based inks
• Can be post hardened with Dirasol Super Hardener or water proofed with Sericure
• Emulsion will last up to 3 months if kept in cool conditions / longer if refrigerated

We recommend that the emulsion is used in sub due lit conditions or use low blue light and low ultra-violet content.

Usage instructions – Fill the sensitiser bottle up to 80% of total capacity and shake well until the sensitiser is fully dissolved.  Then add the sensitiser to the emulsion and thoroughly stir with a plastic or wooden stirring stick. Leave the emulsion for at least 1 hour before use to allow the bubbles to subside. The emulsion will last up to 3 months if kept in cool conditions.

For information on exposure timing and coating guidance please refer to:-

Sericol Emulsions Guide

if you have any questions please email as sales@inkandsolvents.co.uk ir phone 01614426555.