Avient Plastisol Ink Additives – Best of Brands is a range of inks under a group label bringing together the best of the inks selected from all four of the Rutland brands (Rutland Inks, Union Inks, Printop and QCM). Please note that gradually Best of Brands ink will be replaced by Avient Speciality Inks.
Plastisol ink additives include :-
- BC9110 NPT Cotton White Technical Data Sheet
- BL9170 NPT Polyester White Technical Data Sheet
- BB0211 NPT Foil Adhesive
- BB0970 NPT Soft Hand Extender
- BB0980 NPT Printable Adhesive
- BL0966 NPT Grey Barrier Base
- BA0000 NPT Cureable Reducer
- BA0100 NPT Suede Additive / Dulling Paste
- BA0111 NPT Puff Additive
- BA0120 NPT Nylon Bonding Agent / Avient Hugger Catalyst 2940 (please note – only available in 1 Pint / 0.58Lt packs)
- Union EF Unistretch Clear
The product offering under the Best of Brands label includes Cotton White plastisol ink with improved printability, Economic Low Bleed Whites, Inks specifically for Polyester Plastisol Ink, Transfer Products, Adhesives, Special Effects Inks and Additives.
Clears and Bases
BB0211 NPT Foil Adhesive Technical Data Sheet
BB0970 NPT Soft Hand Extender Plastisol Technical Data Sheet
BB0980 NPT Printable Adhesive Plastisol Technical Data Sheet
BL0966 NPT Grey Barrier Base Plastisol Technical Data Sheet
Additives and Modifiers
BA0000 NPT Cureable Reducer Plastisol Technical Data Sheet
BA0100 NPT Suede Additive / Dulling Paste Plastisol Technical Data Sheet
BA0111 NPT Puff Additive Plastisol Technical Data Sheet
Avient Hugger Catalyst 2940 – BA0120 NPT Nylon Bonding Agent Technical Data Sheet
Hugger Catalyst / Nylobond Additive is an essential ingredient for printing on Nylon jackets and other products made of woven nylon. Add 10-15% Nylobond by weight to any Plastisol Ink and it will adhere to nylon. When printing onto heavily waterproof garments or with high opacity inks we advise increasing the percentage amount.
Nylobond will reduce ink viscosity, if so leave the mixture to stand for 2 hours and it will thicken. If not add a thickening additive.
Once the Nylobond has been added to your Plastisol Ink you have a shelf life of 8-16 hours. After that time do not use the ink for printing. Do not return the Plastisol Ink containing Nylobond to the original container as it will contaminate the remaining ink. Garments need to be cured in the normal way when using Plastisol Inks. Available in 500ml / 1 Litre containers.
Unistretch Clear when you are using stretchy fabrics such as Lycra/Spandex or any non-dyed polyester fabric and an improvement in elasticity is required. Do not use water-resistant emulsions as they can react with the components used to manufacture Unistretch and cause the ink to lock-up and clog the mesh.
Mixing Instructions: Up to 35% Unistretch Clear may be added to plastisol to achieve desired elongation in print. Do Not mix into inks formulated for polyester or print this product onto any dyed fabric containing polyester as it will promote dye migration.
if you have any questions or need further help please give us a call or email email@example.com