Blacquer Consumables including ink :-
Bulk ink – available in 250ml / 500ml and 1 Litre quantities
Blacquer Cleaning Fluid 500ml, used for cleaning Syringes after re filling blacquer cartridges. For further instructions please refer to the installation guide. PLEASE NOTE – CLEANING FLUID ONLY TO BE USED FOR CLEANING SYRINGES – DO NOT PUT CLEANING FLUID IN THE CARTRIDGES
Blacquer Pack of 6 Cartridges for Epson 1500W. IMPORTANT – When installing cartridges, remember to remove the small rubber bung first (please see picture), we recommend that you print to standard office paper first prior to printing fim positives as sometimes it can take a few prints for cartridges to settle. Also if you have refilled the cartridges run a few prints on standard office paper first.
If you are having issues with print quality then we recommend using the blacquer cleaning cartridges :-
Run a nozzle check with the ink already installed
Install cleaning cartridges
Run a cleaning cycle
Run two or three prints at high quality
Run another clean cycle
Run a new nozzle check. Compare to the old nozzle check and the nozzles should be back. If not all nozzles (or nearly all) repeat the cycle.