You currently have no products in your basket.
Payment methods


SISS Print Solutions
Fujifilm MagnaColours

MagnaPrint Plascharge (Plastisol Ink Discharge Additive)

Product Ref: QR2661
MagnaPrint Plascharge (Plastisol Ink Discharge Additive)
Manufacturer: Wicked Printing Stuff


MagnaPrint Plascharge G5210 -  can be used as an underbase or has a hybrid which you can mix 50/50 with a standard plastisol ink.

If using as an underbase mix plascharge with 6% of Activator M, leave for 10 minutes and re mix before use.  When using Plascharge as an underbase we recommend that you flash the underbase when  overprinting with Plastisol or print wet on wet if using a High Solids Water Based ink.

if using as an hybrid mix 50 / 50 with standard plastisol ink and activate with 6% Activator M.  We recommend that you print wet on wet when used as an hybrid.

  • Mesh Count 43 - 77T
  • Use Water resistent emulsion
  • Suitable for cotton garments
  • Squeegee - 65 Square Blade
  • Print wet on wet or flash if using as an underbase.
  • Recommend 3 - 4mm off contact.  The discharge paste must penetrate the fabric so you may need to adjust squeegee pressure
  • Same cure profile for plastisol inks.

As always please test before embarking on a production batch as some plastisol inks do not always behave in a consistent manner and potentially the activator can bleach the colour.

Data Sheet

Safety Sheet

Available in 30 / 60 / 120kg quantities

Please contact us on 01614426555 or for pricing