You currently have no products in your basket.
Payment methods

Youtube

weiss
Ulano
Nazdar
Macdermid
Chromaline
SISS Print Solutions
Fujifilm MagnaColours

MagnaPrint Discharge Activator AB

Product Ref: QR2660
MagnaPrint Discharge Activator AB
Manufacturer: Wicked Printing Stuff

Description

MagnaPrint Discharge Activator AB WX198/50.

Mix selected base with desired amount of ECO Pigment (up to 6%) then add Activator AB (6%).  Mix and leave for 10 minutes to allow Activator to dissolve. Re mix prior to printing.  Please note that the shelf life of the base after activation is 8 hours (dependant on room temperature)

  • Mesh Count 43 - 77T
  • Use Water resistent emulsion
  • Squeegee - 65 Square Blade
  • Print wet on wet
  • Recommend 3 - 4mm off contact.  The discharge paste must penetrate the fabric so you may need to adjust squeegee pressure
  • Cure for 180 seconds at 165-170 degrees C

Data Sheet

Safety Sheet

Available in 1 / 5 / 50kg quantities

Please contact us on 01614426555 or sales@inkandsolvents.co.uk for pricing