You currently have no products in your basket.
Payment methods

Youtube

weiss
Ulano
Nazdar
Macdermid
Chromaline
SISS Print Solutions
Fujifilm MagnaColours
View Info

HS-A High Solids Acrylic Water Based Rubber Inks

Looking for an ECO friendly screen printing ink?

Rutland's newest addition to their eco friendly screen printing range. The HS-A (High Solids Acrylic Water Based Rubber) Inks are great for printing onto 100% cotton and 100% polyester garments. These inks are extremely durable and prints wet-on-wet with good opacity and stretch.

HS-A Inks are easy to clear through the mesh in one pass and have excellent print qualities. The White inks typically flash dry in around 4 seconds and gives a good, strong base to overprint onto.

The overall look and feel of the HS-A Inks is softer and slightly more rubbery then Plastisol Inks.

For creating your screens a water resistant stencil and filler is required. We would advise the Autosol 5000 Emusion or preferably the Ulano 925 Water Resistant Emulion. 

Recommended curing temperature is 320 F (160 C) and for between 90-180 seconds (dependant on garment weight, ink deposit and room tempature.

Inks must be stored between 65 F - 100 F (18-35C) and must be kept out of direct sunlight and containers tightly sealed. Typically shelf life up to 12 months.

These inks are sold in the quantities of 500g, 1 Kilo and 1 Gallon (4/5 Kilo's)