You currently have no products in your basket.
Payment methods


SISS Print Solutions
Fujifilm MagnaColours

NPT Discharge Base US Gallon

Product Ref: QR2176
NPT Discharge Base US Gallon
£39.00 ex VAT
In Stock
Manufacturer: Wicked Printing Stuff


Discharge Base is used with pigments or as a stand-alone product to remove the colour from 100% cotton fabrics.  Mix pigments at up to 30% to create dischargeable colours - wet on wet printing.  Test all colour mixes (and test garments) for suitablility prior to mixing a production quantity.

You need to add between 3% to 8% of discharge agent to activate the base.

Garments discharge differently, you should use as little as possible to discharge the colour of the particular garment.  Only activate enough base to run or 3 hours,  as soon as it is activated you have approx 8 hours shelf life.

Suitable for mesh counts between 32 - 64T on screens with good tension.  You will need to use a water resistant emulsion such as Ulano 925WR.

You will need a long tunnel dryers for curing as you need a dwell time between 90 - 120 seconds, temperature 162 celsius.

Use water for clean up.




Select Quantity and choose Add To Basket