Ulano Proclaim EmulsionProduct Ref: QR0566
Ulano Proclaim emulsion diazo blue type is an all purpose textile and graphic emulsion. It prints a wide variety of inks and substrates. Excellent definition and resolution, producing sharp durable stencils. A true multi-purpose emulsion for textiles and graphics.It is a 2-Part emulsion plus sensitizer. (Previously referred to as Photocure Emulsion)
Light blue in colour, Proclaim turns light green when sensitized. Properly exposed non-image areas revert back to the original blue colour, providing a built-in indicator of adequate exposure.
For use with Plastisol and Solvent based inks. If you are using waterbased inks please select the 925WR emulsion, if you use Proclaim with waterbased inks there is a chance of the stencil degrading.
Available in 500ml, 1 Litre or 1 Gallon (4.0 ltr) tubs.
Check out our screen printing tutorial (you can skip to Step 3, approx 4min 53 secs) for the section showing how to prepare the emulsion and coat the screen.
When used with exposure units/Light sources other than our 1000watt halogen light, exposure times will vary:
- Pre-Sensitized - up to 12 months
- Sensitized - 4-8 weeks
Emulsion is best stored in a cool dark environment where adverse weather conditions do not occur. If the storage temperature is warm or hot, or below freezing, emulsion has a tendency to react and will pass its expiry date. The most obvious way of telling whether the emulsion has expired is upon 'clearing the image' with water, the sensitizer will not have reacted to the light source and the emulsion will simply wash out completely.
You can find the Material Safety Data Sheet on the link below